Loading ...
Loading ...
Loading ...
The essentials
Fitting
●
Fit the wheel cover onto the wheel rim by
pr
essing it firmly.
●
Put pr
essur
e on the point of the cut-out for
the valve.
●
Next fit the rest of the wheel cover.
Wheel bolt caps*
Fig. 75
Wheel: wheel bolts with caps.
Removal
●
Fit the plastic clip (vehicle tools) over the
cap until it clicks int
o pl
ace
›
››
Fig. 75.
●
Remove the cap with the plastic clip.
Anti-theft wheel bolts
Fig. 76 Anti-theft wheel bolt with cap and
adapter.
●
Remove the wheel cover* or the cap*.
●
Insert the special adapter (vehicle tools)
ont
o the anti-theft wheel bolt and push it on
as f
ar as it will go
.
●
Insert the wheel brace (vehicle tools) onto
the adapter as far as it will go.
●
Remove the wheel bolt
›››
page 55.
Note
Make a note of the code number of the an-
ti-theft wheel bolt and keep it in a safe
pl
ace, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
Loosening the wheel bolts
Fig. 77
Wheel: loosen the wheel bolts.
●
Insert the box spanner (vehicle tools) onto
the wheel bolt as f
ar as it will go
. An adapt
er
is required to unscrew or tighten the anti-theft
wheel bolts
›››
page 55.
●
Turn the wheel bolt approximately one turn
to the left
›››
Fig. 77 (arrow). To apply the re-
quired torque, hold the wheel brace at the
end. If it is not possible to loosen a wheel bolt,
carefully apply pressure with one foot on the
end of the box spanner. Hold on to the vehicle
for support and take care not to slip.
WARNING
Slightly loosen the wheel bolts (one turn)
before r
aising the vehicle with the jack*. If
not, an accident may occur.
55
Loading ...
Loading ...
Loading ...