Loading ...
Loading ...
Loading ...
To Offset Along the Short Edge (Horizontally)
Specify the adjustment width b
y selecting a positive (+) value to adjust to the right on the paper or a negative
(-) value to adjust to the left on the paper.
To Offset Along the Long Edge (Vertically)
Specify the adjustment width b
y selecting a positive (+) value to adjust down on the paper or a negative (-)
value to adjust up on the paper.
-2.00 to 0.00 to +2.00 (inches) or -50.0 to 00.0
to +50.0 (mm)
[Auto Skip Error] or [Auto Error Skip]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to continue printing if an err
or occurs during printing.
It is recommended that the [Off] setting normally be used so that printing stops when an error occurs.
[Off]
[On]
[Timeout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the time fr
om the start of waiting to receive print data until reception times out when print data reception is
interrupted.
5 to 15
to 300 (sec.)
[Personality]
[Menu] [Function Settings] [Printer] [Printer Settings]
This should normally be set to [Auto], in which the machine automatically identiî ´es the r
eceived print data and
switches to the appropriate operating mode.
If the machine doesn’t switch to the appropriate operating mode for some reason (such as an unknown print data
format), set the operating mode manually.
[Auto]
[PS]
*1
[PCL]
[PDF]
[XPS]
[Imaging]
*1
May not be displayed depending on the model, the installed options, and other settings.
Settings Menu Items
399
Loading ...
Loading ...
Loading ...