Loading ...
Loading ...
Loading ...
Power Analyzers
Operation
33
All available measurement items are listed by categories in a tree structure. See Measurement
Calculation Method
for details of measurement items.
2. For each measurement to add (up to 20 measurements):
a. Use 1 through 4to select a category.
b. Use the arrow (K L M N) keys to move the cursor over the corresponding item.
In most cases, there are 2 dialog boxes displayed in the measurement tree menu, the one on
the left lists measurement items, and the one on the right lists the supported channels or wiring
groups. The yellow block represents the cursor position, and the yellow box indicates the
corresponding branch in the current tree structure.
Note
Under Dual-Unit Interconnection mode, "Remote" option appears in this menu. See
Dual-Unit
Interconnection
for details.
c. Push S to add the current option to the end of the list.
If the left and right dialogs are displayed, first select the name of the measurement item in the
left dialog box, then select the channel or wiring group to be added in the right dialog box, and
finally push S to confirm.
3. Push J repeatedly to go back to the main screen of Meter.
Delete Measurement Items
1. From the main screen of Meter, select 3 (User Item).
2. For each item to delete:
a. Use the arrow (K L M N) keys to move the cursor to the measurement item you want to delete.
b. Push 3 (Del).
3. Push J to go back to the main screen of Meter.
Edit the Current Measurement Item
1. From the mains screen of Meter, select 3 (User Item) > 1 (Edit).
2. Use the arrow (K L M N) keys to move the cursor to the measurement item you want to edit.
3. Select the measurement item by following the operation similar to section
Add Measurement Items.
Unlike the section
Add Measurement Items, the measurement items added will directly replace the
measurement items at the cursor position, instead of adding the newly added measurement to the
end of the list.
Change the Position of the Measurement Item
You can sort the measurement items displayed in the User Defined view:
1. From the main screen of Meter select 3 (User Item).
2. To move each item:
a. Use the arrow (K L M N) keys to move the cursor to the measurement you want to move.
b. Push 4() or 5 ( ).
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...