Loading ...
Loading ...
Loading ...
29
en
Troubleshooting
Problem Cause Remedy
The pressure locking handle
of the appliance cannot be
opened.
Food is obstructing the
overpressure lock and the pressure
locking handle is blocked.
Proceed as described in chapter
X “Release steam manually” see
page 16. If the problem persists,
contact customer service.
Steam constantly escapes
from the steam outlet, even
though the steam pressure
function is switched on.
The valve plug is not properly
placed on the valve.
Disconnect the appliance from the power
supply and allow to cool down. Remove
the steam outlet and place the valve plug
properly on the valve.
Display screen
P
This is not an error. The steam is
released automatically.
Wait until the steam has been released
completely or release steam manually.
Display screen
OPEn
Pressure locking handle closed
(
N) for a preparation programme
without steam pressure function.
Open pressure locking handle (
M) to
deactivate the steam pressure function.
Display screen
CLOSE
Pressure locking handle open
(
M) for a preparation programme
with steam pressure function.
Close the pressure locking handle (
N)
to activate the steam pressure function.
Display screen
E1~E6
Fault in the appliance. Abort the preparation programme. Discon-
nect the appliance from the power supply.
Switch the appliance on again. If the
problem persists, contact customer service.
Display screen
E0
Incorrect pan inserted or pan not
recognised.
Insert the pan properly. If the display
persists for more than 20 seconds,
disconnect the appliance from the power
supply and contact customer service.
Display screen
E1
The steam pressure function does
not work properly.
Disconnect the appliance from the
power supply and restart. If the problem
persists, contact customer service.
Display screen
E2, E5, E6 or E7
The appliance has overheated. Disconnect the appliance from the power
supply and allow to cool down. Restart
the appliance once it has cooled down.
Short-circuit in the appliance. Disconnect the appliance from the power
supply and contact customer service.
Display screen
E3
Mains voltage too high. Contact electricity provider or grid
operator. Have the power supply checked
by an expert.
Display screen
E4
Mains voltage too low.
Display screen
E8
Communication failure Restart the appliance once it has cooled
down.
Display screen
E12
When selecting a programme
with a high temperature
(e.g. “
deep fry”), unsuitable
ingredients have been added
(e.g. water). The programme is
aborted to prevent overpressure.
Remove the unsuitable ingredients
from the pan. Clean pan and then ll
correctly (e.g. with oil for the programme
“
deep fry”). Leave the lid open depending
on the programme selected X “List of
preparation programmes” see page 24.
Restart preparation programme.
If you are unable to solve the problem, always call the hotline!
You will nd the telephone numbers at the back of these instructions.
MUC6_MUC8_EU2_8001036705.indb 29 15.03.2016 14:46:29
Loading ...
Loading ...
Loading ...