Loading ...
Loading ...
Loading ...
74
WORKSHOP TOOLS
Window Door Roof
4. Tap Exit to close the results message.
5. Tap on the
icon at the top of the page to return to the Workshop Tools screen.
WINDOW DOOR ROOF
With this function, you can reset the zero point (stop point) for the window, door, or sunroof sensors after being
replaced or serviced. This function can also set the sunroof to be locked off, close when it rains, the memory function
of the sliding/tilting sunroof, the outside temperature threshold, etc.
Window Door Roof is only available for BMW, Chrysler, Ford, GM, Honda, Hyundai-KIA, Nissan, Subaru, Toyota,
and Volvo vehicles. Procedures vary between vehicle makes and models.
NOTE: If an error occurs while performing Window Door Roof, an “advisory”
message display. Choose Exit, as necessary, to return to the Workshop Tools
screen.
NOTE: If Window Door Roof is not supported for the vehicle under test, an “advisory”
message display. Tap Exit, as necessary, to return to the Workshop Tools screen.
1. Select Window Door Roof in the Workshop Tools screen.
n A “One moment please…” message may display.
n One or more sub-menus will display. Select the desired
options, then proceed to step 2.
2. One or more “informational/ instructional” screens display.
n Perform test procedures as directed. Choose Next or
Continue, as appropriate, to scroll to the next screen.
3. For some vehicles, “status” screens display as each phase of the
calibration procedure is successfully completed. Choose Next or
Continue, as appropriate, to scroll to the next screen.
n A “results” screen displays when the procedure has been
completed.
4. Tap Exit to close the results message.
5. Tap on the
icon at the top of the page to return to the Workshop
Tools screen.
Loading ...
Loading ...
Loading ...