7111 User Manual

Loading ...

OBD2 DIAGNOSTICS

Additional Testing Utilities

Onboard Diagnostics Mode Test (Mode $06)

The Onboard Diagnostics Mode Test (Mode $06) retrieves and displays test results for emission-related powertrain

components and systems that are not continuously monitored. The tests available are determined by the vehicle

manufacturer.

NOTE: The tablet does not perform the OBD mode test. Instead, it retrieves results

from the most recently performed tests from the onboard computer’s memory.

1. From the OBD Mode Test screen, tap Onboard Diagnostics Mode Test (Mode $06).

2. When test results have been retrieved, the test results screen displays. The following information is provided

for each available test:

n Test ID number

n Component ID

n Test Value

n Min or Max test limit

NOTE: Only one test limit, either Min or

Max, is shown for any given test.

n Unit of measurement

n Status

NOTE: Status is calculated by the tablet by comparing the test Value against the

displayed test limit (either Min or Max). Status is shown as either Low, High or OK.

3. Tap the X icon to close the test results screen and return to the OBD Mode Test screen.

Evaporative Test (Mode $08)

The Evaporative Test (Mode $08) function lets you initiate a leak test for the vehicle’s EVAP system.

NOTE: The tablet does not perform the leak test, but signals to vehicle’s on-board

computer to initiate the test. The vehicle manufacturer determines the criteria

and method for stopping the test once it has been started. BEFORE using the

Evaporative Test function, refer to the vehicle’s service manual to determine the

procedures necessary to stop the test.

1. From the OBD Mode Test selection screen, tap Evaporative Test (Mode $08).

2. When the EVAP leak test has been initiated, a conrmation screen shows the message “OK.” Tap the X icon

to close the message and return to the OBD Mode Test screen.

NOTE: If the Evaporative Test (Mode $08) is not supported by the vehicle, an

advisory screen shows the message “Not support.”

Loading ...

User Manual - Page 31