Lexmark MX931DSE User's Guide PDF

Loading ...

Setting the fax date and time

Note: Make sure that fax is

conﬁgured.

For more information, see the Setting up the printer to fax section.

1 From the home screen, touch Settings > Device > Preferences > Date and Time > Conﬁgure.

2 Conﬁgure the settings.

Conﬁguring daylight saving time

Note: Make sure that fax is

conﬁgured.

For more information, see the

Setting up the printer to fax section.

1 From the home screen, touch Settings > Device > Preferences > Date and Time > Conﬁgure.

2 In the Time Zone menu, touch (UTC+user) Custom.

3 Touc h UTC (GMT) Oset, and then conﬁgure the settings.

Conﬁguring

the fax speaker settings

Note: Make sure that fax is conﬁgured. For more information, see the

Setting up the printer to fax section.

1 From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.

2 Do the following:

• Set Speaker Mode to Always On.

• Set Speaker Volume to High.

• Enable Ringer Volume.

Conﬁguring the e

‑mail SMTP settings

Conﬁgure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The

settings vary with each e‑mail service provider.

Before you begin, make sure that the printer is connected to a network and that the network is connected to

the Internet.

Using the Embedded Web Server

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > E

‑mail.

3 From the E‑mail Setup section, conﬁgure the settings.

Notes:

• For more information, see the list of

e‑mail service providers.

Set up, install, and conﬁgure 47

Loading ...

Lexmark MX931DSE