Loading ...
Loading ...
Loading ...
E-mailing problems
Disabling the “SMTP server not set up” error message
From the control panel, navigate to Settings > E
‑mail > E‑mail Setup > Disable “SMTP Server not set up” error
> On.
To prevent the error from happening again, do one or more of the following:
• Update the printer firmware. For more information, see the “Updating firmware” section.
• Configure the e‑mail SMTP settings. For more information, see
“Configuring the e‑mail SMTP settings” on
page 47.
Cannot send e
‑mails
Action Yes No
Step 1
Make sure that the e‑mail SMTP settings are configured correctly.
For more information, see
“Configuring the e‑mail SMTP settings”
on page 47.
Can you send an e‑mail?
The problem is
solved.
Go to step 2.
Step 2
Make sure that you are using the correct password. Depending on
your e‑mail service provider, use your account password, app
password, or authentication password. For more information, see
“Configuring
the e‑mail SMTP settings” on page 47.
Can you send an e‑mail?
The problem is
solved.
Go to step 3.
Step 3
Make sure that the printer is connected to a network and that the
network is connected to the Internet.
Can you send an e‑mail?
The problem is
solved.
Contact
customer
support.
Troubleshoot a problem 391
Loading ...
Loading ...
Loading ...