Loading ...
Loading ...
Loading ...
21
˚F/˚C Conversion
The default temperature setting is Fahrenheit (˚F) but the NuWave Oven Pro Plus can
display Celsius (˚C) as well.
1. Press and hold Cook Temp for 3 seconds to activate ˚F/˚C conversion mode. The LED
Display will display “350” and TEMP will be flashing.
2. The LED Display will display ˚F, beep once and TEMP will be illuminated for 5 seconds.
If no further action is taken, the Oven will automatically exit ˚F/˚C conversion mode.
3. While in ˚F/˚C conversion mode, press 0 to change the LED display to ˚C at which point
the Oven will give off one single long beep.
4. Press 0 once more to change back to ˚F, if desired.
5. Once the desired temperature setting is set, do not press any buttons for 5 seconds or
press Clear to exit ˚F/˚C conversion mode.
6. The new temperature setting (˚F or ˚C) will become the default setting until changed,
even if the Oven is powered off.
Cook Time Function
1. Press the Cook Time Button. The TIME indicator will flash in the right corner of the
display panel and "0" will be illuminated on the LED display.
2. Enter the time in hours and minutes by pressing the corresponding numerals then
press Start. For example, 1 hour and 30 minutes would be entered by pressing 1,3,0
and the display panel will show 1:30. For 5 minutes just push 5; for 46 minutes,
push 4, 6. If the number needs to be corrected, clear the entry by pressing the
Pause/Clear button twice. Then re-enter the correct numbers and press Start.
3. While cooking, you may change the cooking time at anytime by pressing Cook Time,
TIME will begin flashing. Enter the desired cooking time, the LED display will show
the remaining cooking time, TIME will be illuminated and the colon will be flashing.
NOTE: When cooking at temperatures between 100°F and 324°F, the maximum cooking
time is 9 hours and 59 minutes. When cooking at temperatures between 325°F and 350°F,
the maximum cooking time is 2 hours. If a cooking time longer than 2 hours is entered
when cooking in this temperature range, the NuWave Oven Pro Plus will default back
to 2 hours.
Cook Temp Function
1. The default cooking temperature is 350°F (177°C).
2. To change the cooking temperature, press Cook Temp. The LED Display will display
350°F (177°C) and TEMP will be flashing.
3. Select your desired cooking temperature. The temperature can be adjusted by 1
degree within the NuWave Oven Pro Plus’s temperature range. The minimum
temperature is 100°F (38°C) and the maximum temperature is 350°F (177°C). TEMP
will continue to flash on the LED Display.
4. While cooking, you may change the cooking temperature at any time by pressing Cook
Temp. The colon in the LED Display will disappear, TIME will be illuminated and TEMP
will be flashing. The current cooking temperature will be displayed for 3 seconds.
During that time, you may enter a new cooking temperature of your choice.
5. While cooking, only Cook Time, Cook Temp and Pause/Clear buttons can be used.
6. The cooking temperature cannot be changed after pressing Delay or Reheat.
Owner’s Manual
Loading ...
Loading ...
Loading ...