Loading ...
Loading ...
Loading ...
APPENDIX 17-53
Cable, Wire, and Hose Routing
1. Run the purge hose between the brake hoses (ABS equipped models) and frame ground lead.
2. Clamp (Hold the breather hose and purge hose. Place it to the hose joint of the breather hose.)
3. Run the purge hose above the fuel pump lead and main harness. Run the breather hose under
the fuel pump lead and main harness.
4. Clamp (Hold the breather hose. Install it to the battery case.)
5. Run the purge hose and breather hose between the battery case and rear frame bracket.
6. Run the breather hose above the battery negative (–) cable, purge hose and main harness.
7. Purge Valve
8. Run the purge hose under the battery negative (–) cable. Run it above the main harness. Run
it to the outside of the starter motor cable.
9. Run the purge hose (from throttle body assy) under the brake hoses (ABS equipped models)
and purge hose (to canister).
Loading ...
Loading ...
Loading ...