Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-97
Immobilizer System (Equipped Models)
•
The other remaining ignition key is registered in the ECU.
The red warning indicator (LED) and immobilizer warning
indicator [A] blink 2 times and stops for 1 second and
then repeats this cycle to indicate successful registration
of ignition key.
•
Turn to “OFF” the ignition switch and wait for period more
than 15 seconds.
•
The registration mode automatically ends.
•
The red warning indicator (LED) goes off [A].
NOTE
○
Turn the ignition switch to “ON” with the registered igni-
tion key.
○
Check that the engine can be started using all regis-
tered ignition keys.
Case 4: When all registered ignition keys are faulty or
lost.
The all registered ignition keys replacement is considered
very rare case. However if it is required, the following is
necessary.
NOTE
○
The ECU must be replaced with a new one because
the registered ignition key code that is registered in the
current ECU can not be rewritten.
•
Prepare a new ECU [A] and 2 new ignition keys [B].
NOTE
○
The key registration unit is not required.
○
After replacing the ECU, be sure to register the 2 ignition
keys. If the 2 keys are not registered, the engine can
not be started.
•
Insert the first ignition key into the ignition switch and turn
it to “ON.”
Loading ...
Loading ...
Loading ...