Loading ...
Loading ...
Loading ...
2-48 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Master Cylinder Rubber Parts Replacement
Front Master Cylinder Disassembly
•
Remove the front master cylinder (see Front Master Cylin-
der Removal in the Brakes chapter).
•
Remove:
Front Brake Reservoir Cap Bolts [A]
Reservoir Cap [B]
Diaphragm Plate [C]
Diaphragm [D]
Float [E]
Front Brake Reservoir Inner Bolt [F]
Front Brake Reservoir Bolt [G]
•
Pull out the fluid reservoir [H] and O-rings [I].
•
Unscrew the locknut [J] and pivot bolt [K], and remove the
brake lever.
•
Remove the circlip [L].
Special Tool - Inside Circlip Pliers: 57001-143
•
Pull out the piston assembly [M].
•
Replace:
Diaphragm [D]
O-rings [I]
Circlip [L]
Piston Assembly [M]
Rear Master Cylinder Disassembly
•
Remove the rear master cylinder (see Rear Master Cylin-
der Removal in the Brakes chapter).
•
Remove the circlip [A], connector [B] and O-ring [C].
Special Tool - Inside Circlip Pliers: 57001-143
•
Slide the dust cover [D] out of place, and remove the cir-
clip [E].
•
Pull out the push rod assembly [F].
•
Remove the piston assembly [G] and return spring [H].
NOTICE
Do not remove the secondary cup from the piston
since removal will damage it.
•
Replace:
Circlip [A]
O-ring [C]
Circlip [E]
Push Rod Assembly [F]
Piston Assembly [G]
Diaphragm [I]
Loading ...
Loading ...
Loading ...