Loading ...
Loading ...
Loading ...
2-34 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Engine Lubrication System
Engine Oil Change
•
Situate the motorcycle so that it is vertical after warming
up the engine.
•
Remove the engine oil drain bolt [A] to drain the oil.
The oil in the oil filter can be drained by removing the filter
(see Oil Filter Replacement).
•
Replace the drain bolt gasket [B] with a new one.
•
Tighten the drain bolt.
Torque - Engine Oil Drain Bolt: 29 N·m (3.0 kgf·m, 21 ft·lb)
•
Remove the oil filler plug [A].
•
Pour in the specified type and amount of oil.
Recommended Engine Oil
Type:
API SG, SH, SJ, SL or SM with JASO MA,
MA1 or MA2
Viscosity:
SAE 10W-40
Capacity: 3.2 L (3.4 US qt) (when filter is not removed)
3.8 L (4.0 US qt) (when filter is removed)
4.0 L (4.2 US qt) (when engine is completely
dry)
NOTE
○
Do not add any chemical additive to the oil.Oils fulfilling
the above requirements are fully formulated and provide
adequate lubrication for both the engine and the clutch.
○
Although 10W-40 engine oil is the recommended oil
for most conditions, the oil viscosity may need to be
changed to accommodate atmospheric conditions in
your riding area.
•
Replace the O-ring of the oil filler plug with a new one.
•
Apply grease to the new O-ring.
•
Install the oil filler plug.
Torque - Oil Filler Plug: 2.0 N·m (0.20 kgf·m, 18 in·lb)
•
Check the oil level (see Oil Level Inspection in the Engine
Lubrication System chapter).
Loading ...
Loading ...
Loading ...