Loading ...
Loading ...
Loading ...
11-12 FINAL DRIVE
Sprocket, Coupling
Rear Sprocket Removal
•
Remove the rear wheel (see Rear Wheel Removal in the
Wheels/Tires chapter).
NOTICE
Do not lay the wheel on the ground with the disc
facing down. This can damage or warp the disc.
Place blocks under the wheel so that the disc does
not touch the ground.
•
Remove:
Rear Sprocket Nuts [A]
Rear Sprocket [B]
Rear Sprocket Installation
•
Install the sprocket facing the tooth number marking [A]
outward.
•
Replace the rear sprocket nuts with new ones.
•
Tighten the rear sprocket nuts following the specified
tightening sequence.
Torque - Rear Sprocket Nuts: 59 N·m (6.0 kgf·m, 44 ft·lb)
•
Install the rear wheel (see Rear Wheel Installation in the
Wheels/Tires chapter).
Coupling Installation
•
Apply high-temperature grease to the following.
Coupling Grease Seal Lips [A]
Coupling Internal Surface [B]
Loading ...
Loading ...
Loading ...