Loading ...
Loading ...
Loading ...
16-56 ELECTRICAL SYSTEM
Electric Starter System
NOTE
â—‹
Even if the foregoing checks show the armature to be
good, it may be defective in some manner not readily
detectable with a tester. If all other starter motor and
starter motor circuit components check good, but the
starter motor still does not turn over or only turns over
weakly, replace the starter motor with a new one.
Brush Lead Inspection
•
Measure the resistance as shown.
Terminal and Positive Brush [A]
Right-hand End Cover and Negative Brush [B]
If there is not close to zero ohms, the brush lead has an
open. Replace the right-hand end cover assembly.
Right-hand End Cover Assembly Inspection
•
Measure the resistance as shown.
Terminal and Right-hand End Cover [A]
If there is any reading, the right-hand end cover assembly
have a short. Replace the right-hand end cover assembly.
Starter Relay Inspection
•
Remove:
Battery Negative (–) Cable (see Battery Removal)
Starter Relay Cover [A]
•
Disconnect:
Connector [A]
Cable Terminals [B]
•
Remove:
Starter Relay [C]
Loading ...
Loading ...
Loading ...