Loading ...
Loading ...
Loading ...
CRANKSHAFT/TRANSMISSION 9-13
Crankcase Splitting
•
Fit the lower crankcase to the upper crankcase.
NOTE
○
Make the application finish within 20 minutes when
the liquid gasket to the mating surface of the lower
crankcase half is applied.
○
Moreover fit the case and tighten the bolts just after
application of the liquid gasket.
•
The M9 bolts [A] have copper plated washers [B], replace
them with new ones.
•
Apply molybdenum disulfide oil solution to both sides [C]
of the copper plated washer and threads [D] of the M9
bolts.
•
Tighten the lower crankcase bolts using the following
steps.
Following the sequence numbers on the lower crankcase
half, tighten the M9 bolts [1 ∼ 10] with copper plated wash-
ers.
Torque - Crankcase Bolts (M9): 40 N·m (4.1 kgf·m, 30 ft·lb)
Replace the washer [A] with a new one.
Tighten the M7 bolts.
Torque - Crankcase Bolts (M7): 20 N·m (2.0 kgf·m, 15 ft·lb)
L=60mm(2.36in.) [B]
L=50mm(1.97in.) [C]
L=45mm(1.77in.) [D]
Loading ...
Loading ...
Loading ...