Loading ...
Loading ...
Loading ...
6-14 CLUTCH
Clutch
Clutch Plate Assembly Inspection
•
Inspect the friction plate thickness (see Clutch Plate,
Wear, Damage Inspection).
•
Measure the length [A] of the clutch plate assembly as
shown.
Assemble:
Clutch Hub [B]
Spring Seat [C]
Spring [D]
Friction Plates [E]
Steel Plates [F]
Clutch Spring Plate [G]
Clutch Springs [H]
Clutch Spring Bolts [I]
NOTE
○
Install the both ends marked two friction plates at dis-
assembled to the their original position.
Torque - Clutch Spring Bolts: 8.8 N·m (0.90 kgf·m, 78 in·lb)
Clutch Plate Assembly Length
Standard: 51.1
∼ 51.7 mm (2.01 ∼ 2.04 in.)
If the length is not within the specified range, adjust the
length (see Clutch Plate Assembly Adjustment).
Clutch Plate Assembly Adjustment
•
Inspect the clutch plate assembly length, and then re-
place the steel plate(s) which brings the length within the
specified range.
•
Remove:
Clutch Spring Bolts
Clutch Springs
Clutch Spring Plate
•
Replace the following steel plate(s).
Thickness Part Number
2.3 mm (0.091 in.)
13089-0008
2.6 mm (0.102 in.) (STD)
13089-0009
2.9 mm (0.114 in.)
13089-1093
NOTE
○
Do not use the steel plates of 2.3 mm (0.091 in.) and
2.9 mm (0.114 in.) thickness at the same time.
•
Install the removed parts, and inspect the clutch plate as-
sembly length.
Torque - Clutch Spring Bolts: 8.8 N·m (0.90 kgf·m, 78 in·lb)
Loading ...
Loading ...
Loading ...