Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-35
Charging System
Stator Coil Installation
•
Apply a non-permanent locking agent to the threads of
the stator coil bolts and tighten them.
Torque - Stator Coil Bolts: 12 N·m (1.2 kgf·m, 106 in·lb)
•
Secure the alternator lead with a holding plate.
•
Apply a non-permanent locking agent to the threads of
the plate bolt and tighten it.
Torque - Alternator Lead Holding Plate Bolt: 12 N·m (1.2
kgf·m, 106 in·lb)
•
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
•
Apply liquid gasket to the circumference of the alternator
lead grommet [A], and fit the grommet into the notch of
the cover securely.
Sealant - Liquid Gasket, TB1211F: 92104-0004
•
Install the alternator cover (see Alternator Cover Installa-
tion).
Alternator Rotor Removal
•
Remove:
Alternator Cover (see Alternator Cover Removal)
Starter Idle Gear [A] and Shaft [B]
•
Hold the alternator rotor steady with the rotor holder [A]
and stopper [B].
•
Remove the rotor bolt [C] and washer.
Special Tools - Grip [D]: 57001-1591
Stopper: 57001-1679
Rotor Holder: 57001-1690
If using the rotor holder (57001-1757).
•
Hold the alternator rotor steady with the rotor holder [A].
•
Remove the rotor bolt [B] and washer.
Special Tool - Rotor Holder: 57001-1757
Loading ...
Loading ...
Loading ...