Loading ...
Loading ...
Loading ...
16-74 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
About 5 seconds after, the all fuel level gauge segments
and fuel level warning indicator start blinking [A].
If the fuel level gauge does not blink, replace the meter
unit.
NOTE
○
This meter unit has a failure detection function (for open
or short) of the fuel level gauge. When the fuel level
gauge is open or short, the meter unit alerts the rider by
the all fuel level gauge segments blink in the display.
About 10 seconds after, the yellow engine warning indi-
cator (LED) [A] goes on.
If the yellow engine warning indicator (LED) does not go
on, replace the meter unit.
NOTE
○
This meter unit has a failure detection function of the
communication. When the communication error was
detected, the meter unit alerts the rider by the yellow
engine warning indicator (LED) goes on.
•
Disconnect the terminal [6].
All the LCD segments disappear.
The red warning indicator (LED) [A] starts blinking (see
Abstract section in the Immobilizer System).
If the segments do not disappear, replace the meter unit.
Check 3-2: Meter Communication Line (Service Code
39) Check
•
Connect the leads in the same circuit as Check 3-1.
•
After 10 seconds, the yellow engine warning indicator
(LED) goes on.
•
Set the ODO mode [A] by pushing the upper button [B].
•
Push the upper button for more than 2 seconds.
Loading ...
Loading ...
Loading ...