User Manual - Page 94

For 2020 JEEP GLADIATOR.

Loading ...
Loading ...
Loading ...
92 GETTING TO KNOW YOUR INSTRUMENT PANEL
OIL LIFE RESET IF EQUIPPED
Your vehicle may be equipped with an engine oil change
indicator system. The “Oil Change Required” message will
display in the instrument cluster display for five seconds
after a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent upon
your personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To turn
off the message temporarily, push and release the
OK
button. To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition
in the ON/RUN mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instrument cluster display.
3. Push and hold the
OK button until the gauge resets to
100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, place the ignition in
the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
OFF ROAD + DISPLAY IF EQUIPPED
When the Off Road+ button is pushed in the switch bank,
the Instrument Cluster Display will begin to show
messages related to the feature. Depending on the Four
Wheel Drive mode in use, the messages will differ, and
after five seconds, all messages will clear from the display.
The messages are as follows:
2H: Off Road+ Unavailable, Shift to 4WD
4H: 4WD High Off Road+ Active
4L: 4WD Low Off Road+ Active
Adaptive Cruise Control (ACC) and Speed Control are not
available when using Off Road+. If either option is
selected, a dedicated message will display indicating that
the features are not usable concurrently. Messages are as
follows:
4H: Speed Control — Cruise Control Unavailable in Off
Road+
4H: Adaptive Cruise Control — Adaptive Cruise Control
(ACC) Unavailable in Off Road+
4L: Speed Control — Cruise Control Unavailable in 4WD
Low
4L: Adaptive Cruise Control — Adaptive Cruise Control
(ACC) Unavailable in 4WD Low
NOTE:
The behavior of Electronic Stability Control while in Off
Road+ varies depending on the 4WD status. If the vehicle
is in 4H, Traction Control is automatically turned off. Also,
holding the ESC Off button for five seconds will turn off
ESC. In 4L, Electronic Stability Control automatically shuts
off regardless of the Off Road Status.
INSTRUMENT CLUSTER DISPLAY
S
ELECTABLE ITEMS
The instrument cluster display can be used to view the
following main menu items:
NOTE:
Depending on the vehicles options, feature settings may
vary.
• Speedometer Stop/Start
• Vehicle Info • Audio
• Off-Road — If Equipped
• Driver Assist —
If Equipped
• Messages • Fuel Economy
• Screen Setup • Trip Info
20_JT_OM_EN_USC_t.book Page 92
Loading ...
Loading ...
Loading ...