Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 79
Rear Wall Netting
The rear wall netting can be accessed the same way as the
rear wall storage bin.
Rear Wall Netting
Fastener Bin
Your vehicle is equipped with a Fastener Bin used to store
the fasteners for the doors, windshield, and hard top (if
equipped) while not in use. The Fastener Bin is located
behind the rear seat storage bin. The Fastener Bin
contains foam inserts for each of the fasteners; they are
removable.
To remove the Fastener Bin:
1. Remove the lid and foam inserts from the Fastener
Bin.
2. Remove the three nuts from the bottom of the
Fastener Bin.
NOTE:
The soft top fasteners do not go in the Fastener Bin.
Fastener Bin
ELECTRICAL POWER OUTLETS
There is a 12 V (13 A) auxiliary power outlet that can
provide power for accessories designed for use with the
standard power outlet adapters.
The front power outlet is located in the center of the
instrument panel below the climate controls, and is
powered from the ignition switch. Power is available when
the ignition switch is in the ON or ACC position.
Front Power Outlet
1 — Door Removal
2 — Under Seat Storage Bin Removal
3 — Folding Windshield
4 — Hard Top Removal
CAUTION!
Do not exceed the maximum power of 160 W (13 A) at
12 Volts. If the 160 W (13 A) power rating is exceeded
the fuse protecting the system will need to be replaced.
Power outlets are designed for accessory plugs only.
Do not insert any other object in the power outlets as
this will damage the outlet and blow the fuse.
Improper use of the power outlet can cause damage
not covered by your New Vehicle Limited Warranty.
2
20_JT_OM_EN_USC_t.book Page 79
Loading ...
Loading ...
Loading ...