Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 261
Selection Of Lubricant
Use only the manufacturer's recommended fluid. Refer to
“Fluids And Lubricants” in “Technical Specifications” for
further information.
TRANSFER CASE
Selection Of Lubricant
Use only the manufacturer's recommended fluid. Refer to
“Fluids And Lubricants” in “Technical Specifications” for
further information.
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole
when the vehicle is in a level position.
Transfer Case
Drain And Refill
Refer to the “Maintenance Plan” in “Servicing And
Maintenance” for the proper maintenance intervals.
MANUAL TRANSMISSION — IF EQUIPPED
Selection Of Lubricant
Use only manufacturer's recommended manual
transmission fluid. Refer to “Fluids And Lubricants” in
“Technical Specifications” for further information.
Fluid Level Check
Check the fluid level by removing the fill plug. The fluid
level should be between the bottom of the fill hole and a
point not more than 3/16 of an inch (4.76 mm) below the
bottom of the hole.
Add fluid, if necessary, to maintain the proper level.
Frequency Of Fluid Change
Under normal operating conditions, the fluid installed at
the factory will give satisfactory lubrication for the life of
the vehicle. If the fluid becomes contaminated with water,
it should be changed immediately. Otherwise, change the
fluid as recommended in the Maintenance Plan. Refer to
the “Maintenance Plan” located in “Scheduled Servicing”
in “Servicing And Maintenance” for the proper
maintenance intervals.
AUTOMATIC TRANSMISSION —
I
F EQUIPPED
Selection Of Lubricant
It is important to use the proper transmission fluid to
ensure optimum transmission performance and life. Use
only the manufacturer's specified transmission fluid.
Refer to “Fluids And Lubricants” in “Technical
Specifications” for fluid specifications. It is important to
maintain the transmission fluid at the correct level using
the recommended fluid.
NOTE:
No chemical flushes should be used in any transmission;
only the approved lubricant should be used.
1 — Fill Hole
2 — Drain Hole
CAUTION!
Using a transmission fluid other than the
manufacturer’s recommended fluid may cause
deterioration in transmission shift quality and/or torque
converter shudder. Refer to “Fluids And Lubricants” in
“Technical Specifications” for fluid specifications.
7
20_JT_OM_EN_USC_t.book Page 261
Loading ...
Loading ...
Loading ...