Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 25
4. Pull up on the red locking tab to unlock the wiring
harness.
Closed Wiring Harness
5. Push and hold down the black security tab under the
wiring harness, and lift the harness lever into the
open position.
Open Wiring Harness
6. With the wiring harness open, pull downward on the
wiring connector to unplug. Unhook the wire harness
strap from the hook on the bodyside door opening.
Store the wiring connector in the lower door basket of
the door.
7. With the door in the open position, remove the check
bolt from the door check attachment on the bodyside
(using a #T40 Torx head driver).
NOTE:
Keep the check arm in the extended position for easier
re-installation.
Door Check Arm
8. With the door open, lift the door with the help of
another person, to clear the hinge pins from their
hinges and remove the door.
To reinstall the door(s), perform the previous steps in the
reverse order.
NOTE:
The upper hinge has a longer pin, which can be used to
assist in guiding the door into place when reinstalling.
When reinstalling the door check arm attachment bolt,
bolt torque should be between 11.76 ft·lb / 16 N·m and
27.9 ft·lb / 38 N·m.
1 — Locking Tab
2 — Wiring Harness Lever
1 — Wiring Harness Lever
2 — Black Security Tab
2
20_JT_OM_EN_USC_t.book Page 25
Loading ...
Loading ...
Loading ...