Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 55
Removing The Rear Window And Quarter
Panel Cover Assemblies
NOTE:
Both quarter panel cover assemblies and the rear window
must
ALL be removed together, or installed together.
1. Start by removing the rear window first. Use the two
straps located on the bottom of each side of the rear
window to remove the right and left vertical
retainers, as well as the lower center retainer.
Step One (Right Side Shown)
Step One
2. While keeping the rear window level, slide it outward
in either direction until it is completely separate from
its retainer.
Do not pull downward while removing the
rear window. Damage to the retainer could result.
Store the rear window in the soft top rear window
storage bag (if equipped), or in a safe location. Refer
to “Soft Top Rear Window Storage Bag — If Equipped”
in this section for further information.
Step Two
3. After removing the rear window, remove the quarter
panel cover assemblies starting with either side.
Disengage the quarter panel cover assembly from the
bottom by pulling the fabric at the bottom upward.
4. With two hands, grasp the front of the quarter panel
cover assembly and pull outward to disengage it from
its retainer on the door frame.
Step Four
2
20_JT_OM_EN_USC_t.book Page 55
Loading ...
Loading ...
Loading ...