Loading ...
Loading ...
Loading ...
358 MULTIMEDIA
Here are the steps needed for Qualcomm TrueWireless™
Stereo:
1. Push and hold the power button on both Jeep®
wireless speakers until both speakers turn on.
2. Place both speakers into Qualcomm TrueWireless™
Stereo pairing mode. This can be achieved by
pressing and holding the Battery Status button on
both speakers until an audio notification is heard
from both speakers.
3. Connect one of the Jeep® wireless speakers to the
Bluetooth® source. Refer to previous section “Phone
& Bluetooth® Pairing” for additional information.
4. Once the Jeep® wireless speaker is connected to the
Bluetooth® device, audio will be played from both
speakers.
NOTE:
While in Qualcomm TrueWireless™ Stereo mode, the
volume will not have independent speaker control.
Pushing the Up or Down Volume button on either Jeep®
wireless speaker will affect the audio output on both, as
well as volume adjustments on the Bluetooth® device.
Waterproof Features
The Jeep® wireless speaker is IP67 waterproof certified
with design in mind to withstand rainfall, waterjets,
splashing or submerged in up to 3ft (1m) of water for up to
30 minutes.
Warnings, Caution & Legal Information
To reduce the risk of fire or electric shock, do not expose
the Jeep® wireless speaker to rain or moisture while
charging. The Jeep® wireless speaker should not be
exposed to dripping or splashing, and objects filled with
liquids, such as vases, should not be placed on or near it
while being charged or charging other devices. As with any
electronic products, use care not to spill liquids into any
part of the product. Liquids can cause a failure and/or a
fire hazard. The power supply must be used indoors only.
Make no modifications to the product or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, and system performance, and will
void the warranty. Do not place any flame sources, such as
lighted candles, on or near the Jeep® wireless speaker.
The Jeep® wireless speaker contains small parts that may
be a choking hazard and is not suitable for children under
age 3. Do not continue charging the battery if it does not
reach full charge within the specified charging time.
Overcharging may cause the battery to become hot,
rupture, or ignite. If you see any heat deformation or
leakage, properly dispose of the battery. Do not attempt to
charge the battery in temperatures outside the range of
32°- 104°F (0° - 40°C). If the battery begins to leak, do
not allow the liquid to come in contact with your skin or
eyes. If contact has been made, wash the affected area
with plenty of water and seek medical attention
immediately. Do not expose the Jeep® wireless speaker or
battery to excessive heat, including direct sunlight or fire.
Do not store or use inside cars in hot weather, where it can
be exposed to temperatures in excess of 115°F (60°C).
Doing so may cause the battery and power supply to
generate heat, rupture, or ignite. Using the Jeep® wireless
speaker in this manner also may result in a loss of
performance and a shortened life expectancy. Extended
exposure to direct sunlight may damage the external
appearance and material qualities. Do not step on, throw,
or drop batteries or the power supply or device, or expose
them to a strong shock. Do not pierce, crush, dent, or
deform the batteries or power supply in any way. If either
becomes deformed, properly dispose of it. Do not
short-circuit batteries. Do not attempt to service the
Jeep® wireless speaker yourself. Opening or removing
covers may expose you to dangerous voltages or other
hazards and will void the manufacturer’s warranty. To
prevent risk of fire or electric shock, avoid overloading wall
outlets, extension cords, or integral convenience
receptacles. Your Bluetooth® device (mobile phone,
music player, tablet, laptop, etc.) must support the A2DP
Bluetooth® profile in order to work wirelessly with your
Jeep® wireless speaker. The A2DP profile is supported by
most recent mobile products with built-in Bluetooth®
capability. Please refer to your device’s user manual for
details and instruction regarding the Bluetooth® profiles it
supports. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION!
Ensure the Jeep Wireless Speaker is prepared for use in
wet environments by removing all cable connections
and making sure all port covers are sealed tightly. If the
cover is not secured properly, the Jeep Wireless
Speaker may sustain water damage.
20_JT_OM_EN_USC_t.book Page 358
Loading ...
Loading ...
Loading ...