Loading ...
Loading ...
Loading ...
326 MULTIMEDIA
Audio
Refer to “Audio Settings” for the adjustable audio settings.
USB/iPod® Mode
USB/iPod® Mode is entered by either inserting a USB
Jump Drive or iPod® cable into the USB port, or by pushing
the MEDIA button located on the faceplate. Once in Media
Mode, press the Source button on the touchscreen, and
select the USB/iPod® button.
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the USB Port. If
you insert a USB/iPod® device with the ignition ON, the
unit will switch to USB/iPod® mode and begin to play
when you insert the device. The display will show the track
number and index time in minutes and seconds. Play will
begin at the start of track 1.
Browse
Press the Browse button on the touchscreen to select
Artist, Albums, Genres, Songs, Playlists or Folders from the
USB/iPod® device. Once the desired selection is made
you can chose from the available media by pressing the
button on the touchscreen. Press the Exit button on the
touchscreen if you wish to cancel the Browse function.
Bluetooth® Mode
Bluetooth® Streaming Audio (BTSA) or Bluetooth® Mode
is entered by pairing a Bluetooth® device containing
music to the Uconnect system.
Before proceeding, the Bluetooth® device must be paired
with the Uconnect Phone to communicate with the
Uconnect system.
Refer to Phone Mode section for pairing procedure.
Once the Bluetooth® device is paired to the Uconnect
system, push the MEDIA button located on the faceplate.
Once in Media Mode, press the Source button on the
touchscreen and select the Bluetooth® button.
NOTE:
For mobile phone compatibility and pairing instructions,
please visit UconnectPhone.com.
AUX Mode
AUX Mode is entered by inserting a AUX device using a
stereo cable with a 3.5 mm audio jack into the AUX port or
by pushing the MEDIA button located on the faceplate.
Once in Media Mode, press the Source button on the
touchscreen, and select the AUX button.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port. If
you insert an Auxiliary device with the ignition on, the unit
will switch to AUX mode and begin to play when you insert
the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with
the VOLUME rotary knob or with the volume of the
attached device.
The radio unit is acting as the amplifier for audio output
from the Auxiliary device. Therefore, if the volume control
on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the music
on the device.
PHONE MODE
Operating Phone Mode
Phone Mode
1 — Call/Redial/Hold
2 — Phone Signal Strength
3 — Paired Phone
4 — Phone Battery Life
5 — Mute Microphone
6 — Transfer To/From Uconnect System
7 — Uconnect Phone Settings
8 — Text Messaging
9 — Direct Dial Pad
10 — Recent Call Log
11 — Browse Phone Book
12 — End Call
20_JT_OM_EN_USC_t.book Page 326
Loading ...
Loading ...
Loading ...