Loading ...
Loading ...
Loading ...
222 IN CASE OF EMERGENCY
Assembly Bracket
4. Rotate the appropriate socket a quarter turn counter-
clockwise, then remove it from the housing.
5. Pull the bulb straight from the socket to replace.
Center High Mounted Stop Lamp (CHMSL)
The stop lamp is mounted on the tailgate. If service is
needed, obtain the LED assembly from an authorized
dealer.
License Plate Lamps
See an authorized dealer to replace these LED
assemblies.
FUSES
GENERAL INFORMATION
The fuses protect electrical systems against excessive
electrical current.
When a device does not work, you must check the fuse
element inside the blade fuse for a break/melt.
Also, please be aware that when using power outlets for
an extended periods of time with the engine off it may
result in vehicle battery discharge.
Blade Fuses
WARNING!
When replacing a blown fuse, always use an appro-
priate replacement fuse with the same amp rating as
the original fuse. Never replace a fuse with another
fuse of higher amp rating. Never replace a blown
fuse with metal wires or any other material. Failure to
use proper fuses may result in serious personal
injury, fire and/or property damage.
Before replacing a fuse, make sure that the ignition
is off and that all the other services are switched off
and/or disengaged.
If the replaced fuse blows again, contact an autho-
rized dealer.
If a general protection fuse for safety systems (air
bag system, braking system), power unit systems
(engine system, gearbox system) or steering system
blows, contact an authorized dealer.
1 — Fuse Element
2 — Blade Fuse with a good/functional fuse element
3 — Blade fuse with a bad/not functional fuse element
(blown fuse)
20_JT_OM_EN_USC_t.book Page 222
Loading ...
Loading ...
Loading ...