Loading ...
Loading ...
Loading ...
84 GETTING TO KNOW YOUR VEHICLE
TONNEAU COVER INSTALLATION
To install the Tonneau Cover, proceed as follows:
1. Position the rolled up Tonneau Cover on the truck
bed and align it to the two fastener locations at the
front of the bed.
Fastener Locations
2. Using a #T50 Torx head driver, secure the fasteners
to the bed.
3. Lower the tailgate to the fully open position before
unrolling the Tonneau Cover.
4. Release the stowage straps used to secure the
Tonneau Cover in the rolled up position.
Release Stowage Strap
5. Roll the Tonneau Cover rearward toward the back of
the truck bed.
Roll Tonneau Cover Rearward
6. Position both Tonneau Cover latches over the locking
mechanisms (one on each side of the truck bed),
making sure the plastic retainer is correctly seated in
the forward part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
20_JT_OM_EN_USC_t.book Page 84
Loading ...
Loading ...
Loading ...