Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 99
Rear Seat Belt Reminder Warning Light —
If Equipped
This light indicates when a rear seat belt is
unbuckled in the second row. When the ignition is
first placed in the ON/RUN or ACC/ON/RUN
position, and if a seat belt in the second row is
unbuckled, a light corresponding to the specific seat will turn
on in the upper right portion of the instrument cluster display,
momentarily replacing the configurable corner information. If
a second row seat belt that was buckled at the start of the trip
is unbuckled, the Rear Seat Belt Reminder Light will change
from green to red and a single chime will sound.
Refer to “Occupant Restraint Systems” in “Safety” for
further information.
Transmission Temperature Warning Light —
If Equipped
This warning light will illuminate to warn of a
high transmission fluid temperature. This may
occur with strenuous usage such as trailer
towing. If this light turns on, stop the vehicle
and run the engine at idle or slightly faster, with the
transmission in PARK (P) or NEUTRAL (N), until the light
turns off. Once the light turns off, you may continue to
drive normally.
Vehicle Security Warning Light —
If Equipped
This light will flash at a fast rate for
approximately 15 seconds when the vehicle
security alarm is arming, and then will flash
slowly until the vehicle is disarmed.
Rear Seat Belt Reminder Indicator Light —
If Equipped With A Premium Instrument
Cluster
This light indicates when a rear seat belt is
unbuckled in the second row. When the ignition
is first placed in the ON/RUN or ACC/ON/RUN
position, and if a seat belt in the second row is
unbuckled, a light corresponding to the specific seat will
turn on in the upper right portion of the instrument cluster
display, momentarily replacing the configurable corner
information. If a second row seat belt that was buckled at
the start of the trip is unbuckled, the Rear Seat Belt
Reminder Light will change from the buckled to the
unbuckled symbol, and a chime will sound.
Refer to “Occupant Restraint Systems” in “Safety” for
further information.
YELLOW WARNING LIGHTS
Anti-Lock Brake System (ABS) Warning
Light
This warning light monitors the Anti-Lock Brake
System (ABS). The light will turn on when the
ignition is placed in the ON/RUN or ACC/ON/
RUN position and may stay on for as long as
four seconds.
If the ABS light remains on or turns on while driving, then the
Anti-Lock portion of the brake system is not functioning and
service is required as soon as possible. However, the
conventional brake system will continue to operate
normally, assuming the Brake Warning Light is not also on.
If the ABS light does not turn on when the ignition is placed
in the ON/RUN or ACC/ON/RUN position, have the brake
system inspected by an authorized dealer.
Electronic Stability Control (ESC) Active
Warning Light — If Equipped
This warning light will indicate when the
Electronic Stability Control system is Active.
The “ESC Indicator Light” in the instrument
cluster will come on when the ignition is placed
in the ON/RUN or ACC/ON/RUN position, and when ESC is
activated. It should go out with the engine running. If the
“ESC Indicator Light” comes on continuously with the
engine running, a malfunction has been detected in the
ESC system. If this warning light remains on after several
ignition cycles, and the vehicle has been driven several
miles (kilometers) at speeds greater than 30 mph
(48 km/h), see an authorized dealer as soon as possible
to have the problem diagnosed and corrected.
WARNING!
If you continue operating the vehicle when the
Transmission Temperature Warning Light is
illuminated you could cause the fluid to boil over,
come in contact with hot engine or exhaust
components and cause a fire.
CAUTION!
Continuous driving with the Transmission Temperature
Warning Light illuminated will eventually cause severe
transmission damage or transmission failure.
3
20_JT_OM_EN_USC_t.book Page 99
Loading ...
Loading ...
Loading ...