Loading ...
Loading ...
Loading ...
330 MULTIMEDIA
Making A Second Call While Current Call Is In Progress
When a phone conversation is active, a second phone call
can be made as follows:
Select the number/contact from the list of recent calls.
Select the contact from the phonebook.
Press the Hold button and dial the number using the
graphic keyboard of the display.
Redial
To call the number/contact of last call made, press the
Redial button.
Answering An Incoming Call
Call Controls
The buttons on the display allow the following phone call
functions to be managed:
Answer
End
Ignore
Put on hold/resume
Deactivate/activate the microphone
Transfer the call
Switch from one call to the other
Conference/merge two active calls
Answering Or Ignoring A Call With No Call Currently In
Progress
When an incoming call rings or is announced on the
Uconnect system, push the Answer button on the
touchscreen, or push the PHONE button on the steering
wheel.
Answering Or Ignoring An Incoming Call With A Call
Currently In Progress
When an incoming call rings or is announced on the
Uconnect system, push the Answer button on the
touchscreen, or push the PHONE button on the steering
wheel to answer the call and put the ongoing call on hold.
NOTE:
Not all mobile phones may support the management of an
incoming call when another phone conversation is active.
Managing Two Phone Calls
If two calls are in progress (one active and one on hold), it
is possible to switch between them pressing the Call On
Hold button or to merge the two calls in a conference
pressing the Merge Calls button.
NOTE:
Check whether the mobile phone in use supports the
management of a second call and the "Conference" mode.
Transferring/Call Continuation
Transferring
The ongoing calls can be transferred from the mobile
phone to the system and vice versa without ending the
call.
To transfer the call, press the Transfer button.
Call Continuation
After the engine is switched off, it is still possible to
continue a phone call.
The call continues until it is ended manually or for a
maximum period of about 20 minutes.
When the system is switched off, the call is transferred to
the mobile phone.
Ending A Call
Press the End button on the touchscreen or the PHONE
button on the steering wheel controls to end a call in
progress.
Only the ongoing call is ended and any call on hold
becomes the new active call.
Depending on the type of mobile phone, if the ongoing call
is ended by the caller, the call on hold may not be
activated automatically.
Uconnect Phone Features
MUTE/UNMUTE
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the beep, say “mute” or “mute off”.
READING MESSAGES
The system can read the messages received by the mobile
phone.
To use this function, the mobile phone must support the
SMS exchange function via Bluetooth®.
If this function is not supported by the phone, the
corresponding message button is deactivated (grayed out)
or may only accept incoming messages.
When a text message is received, the display will show a
screen where the options "Listen", "Call" or "Ignore" can be
selected.
Press the Message button to access the list of SMS
messages received by the mobile phone. The list displays
a maximum of 60 messages received.
20_JT_OM_EN_USC_t.book Page 330
Loading ...
Loading ...
Loading ...