Loading ...
Loading ...
Loading ...
350 MULTIMEDIA
JOIN CALLS
When two calls are in progress (one active and one on
hold), press the Join Calls button on the Phone main
screen to combine all calls into a Conference Call.
CALL TERMINATION
To end a call in progress, momentarily press the Phone
End button on the touchscreen or the Phone End button
on the steering wheel. Only the active call(s) will be
terminated and if there is a call on hold, it will become the
new active call.
REDIAL
Press the Redial button on the touchscreen, or push the
VR button and after the “Listening” prompt and the
following beep, say “Redial.”
The Uconnect Phone will call the last number that was
dialed from your mobile phone.
CALL CONTINUATION
Call continuation is the progression of a phone call on the
Uconnect Phone after the vehicle ignition has been
switched to OFF.
NOTE:
The call will remain within the vehicle audio system until
the phone becomes out of range for the Bluetooth®
connection. It is recommended to press the Transfer
button on the touchscreen when leaving the vehicle.
BROWSING SMS
Using the steering wheel commands, you can view and
manage the last 10 SMS messages received on the
instrument panel. To use this function, the mobile phone
must support the SMS exchange function through
Bluetooth®.
Select the PHONE button on the instrument panel menu,
and then select “SMS Reader” using the arrow keys on the
steering wheel controls.
The “SMS Reader” submenu allows the last 10 SMS
messages to be displayed.
Advanced Phone Connectivity
TRANSFER CALL TO AND FROM MOBILE
PHONE
The Uconnect Phone allows ongoing calls to be
transferred from your mobile phone to the Uconnect
Phone without terminating the call. To transfer an ongoing
call from your connected mobile phone to the Uconnect
Phone or vice versa, press the Transfer button on the
Phone main screen.
CONNECT OR DISCONNECT LINK BETWEEN
THE UCONNECT PHONE AND MOBILE PHONE
If you would like to connect or disconnect the Bluetooth®
connection between a Uconnect Phone paired mobile
phone and the Uconnect Phone, follow the instructions
described in your mobile phone User's Manual.
Things You Should Know About Your
Uconnect Phone
VOICE COMMAND
For the best performance:
Adjust the rearview mirror to provide at least ½-inch (1
cm) gap between the overhead console (if equipped)
and the mirror.
Always wait for the beep before speaking.
Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
Ensure that no one other than you is speaking during a
voice command period.
Performance is maximized under:
Low-To-Medium Blower Setting
Low-To-Medium Vehicle Speed
Low Road Noise
Smooth Road Surface
Fully Closed Windows
Dry Weather Conditions
WARNING!
ALWAYS drive safely with your hands on the wheel. You
have full responsibility and assume all risks related to
the use of the Uconnect features and applications in
this vehicle. Only use Uconnect when it is safe to do so.
Failure to do so may result in an accident involving
serious injury or death.
20_JT_OM_EN_USC_t.book Page 350
Loading ...
Loading ...
Loading ...