Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 17
REMOTE START CANCEL MESSAGE —
I
F EQUIPPED
One of the following messages will display in the
instrument cluster if the vehicle fails to remote start or
exits remote start prematurely:
Remote Start Canceled — Door Open
Remote Start Canceled — Hood Open
Remote Start Canceled — Fuel Low
Remote Start Canceled — Time Expired
Remote Start Disabled — Start Vehicle To Reset
The message will stay active until the ignition is placed in
the ON/RUN position.
TO ENTER REMOTE START MODE
Push and release the Remote Start button on the key fob
twice within five seconds. The vehicle doors and tailgate
will lock, the turn signals will flash twice, and the horn will
chirp twice (if “Sound Horn With Remote Start” is selected
within Uconnect Settings). Then the engine will start, and
the vehicle will remain in the Remote Start mode for a
15 minute cycle.
NOTE:
If an engine fault is present or fuel level is low, the
vehicle will start and then shut down in 10 seconds.
The park lamps will turn on and remain on during
Remote Start mode.
For security, power window operation is disabled when
the vehicle is in the Remote Start mode.
The engine can be started two consecutive times (two
15 minute cycles) with the key fob. However, the igni-
tion must be placed in the ON/RUN position before you
can repeat the start sequence for a third cycle.
TO EXIT REMOTE START MODE
W
ITHOUT DRIVING THE VEHICLE
Push and release the Remote Start button one time or
allow the remote start cycle to complete the entire
15 minute cycle.
NOTE:
To avoid unintentional shutdowns, the system will disable
for two seconds after receiving a valid Remote Start
request.
TO EXIT REMOTE START MODE AND
D
RIVE THE VEHICLE
Before the end of the 15 minute cycle, push and release
the unlock button on the key fob to unlock the doors, or
unlock the vehicle using Keyless Enter-N-Go — Passive
Entry via the door handles, and disarm the Vehicle
Security Alarm (if equipped). Then, prior to the end of the
15 minute cycle, press the brake pedal and push and
release the START/STOP ignition button.
NOTE:
For vehicles equipped with the Keyless Enter-N-Go —
Passive Entry feature, the message “Remote Start
Active — Push Start Button” will display in the instrument
cluster display until you push the START/STOP ignition
button.
REMOTE START COMFORT SYSTEMS —
I
F EQUIPPED
When Remote Start is activated, the Climate Controls may
activate the heated seats (if equipped) and heated
steering wheel (if equipped) in temperatures below 40°F
(4.4°C). These features will stay on through the duration
of Remote Start or until the ignition switch is placed in the
ON/RUN position.
WARNING!
Do not start or run an engine in a closed garage or
confined area. Exhaust gas contains carbon
monoxide which is odorless and colorless. Carbon
monoxide is poisonous and can cause serious injury
or death when inhaled.
Keep key fobs away from children. Operation of the
Remote Start System, windows, door locks or other
controls could cause serious injury or death.
2
20_JT_OM_EN_USC_t.book Page 17
Loading ...
Loading ...
Loading ...