Loading ...
Loading ...
Loading ...
64 GETTING TO KNOW YOUR VEHICLE
1. Fold down the sun visor against the windshield.
2. Turn the three L-shaped locks on the left side panel
(one at the front, the rear, and outside), unlocking
them from the roof.
Step Two
3. Unlatch the left side header panel latch located at the
top of the windshield.
Step Three
4. Remove the left side panel.
5. Repeat the steps above to remove the right side
panel.
Hard Top Panel(s) Storage Bag —
If Equipped
The Freedom Top panels storage bag allows you to store
your hard top panels. The storage bag contains two
compartments.
Lay the bag for the panels down so the loops and hooks
are facing upward. Unzip the bag and fold back the outer
flap.
NOTE:
Ensure the front panel latch is closed prior to inserting
the panel into the panels bag.
There is a pouch located on the front of the bag to store
the provided hard top edge protectors that are used
when the hard top is not installed on the vehicle.
1. Insert the left side hard top panel into the bag with
the latches facing upward.
2. Unfold the black panel divider (ensure the divider is
lying flat).
3. Insert the right side Freedom Top panel into the bag
with the latches facing downward.
NOTE:
Ensure the front panel latch is closed prior to inserting the
panel into the bag.
4. Unfold the outer flap and zip the hard top bag closed.
Step Four
5. Store the Freedom Top panels bag in a safe location.
1 — Rear Panel Lock
2 — Front Panel Lock
3 — Outside Panel Lock
1 — Header Panel Latched
2 — Header Panel Unlatched
20_JT_OM_EN_USC_t.book Page 64
Loading ...
Loading ...
Loading ...