Loading ...
Loading ...
Loading ...
(72,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
1. Adjust the head restraint as follows.
For booster seat:
(1) Remove the head restraint from
the rear seating position where the
child restraint system is to be
installed.
(2) Store the removed head restraint
in the cargo area.
CAUTION
Do not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
For booster cushion:
(1) Raise the head restraint to the
extended position (center seat).
Do not remove the head restraint.
2. Place the booster seat/cushion in the
rear seating position and sit the child
on it. The child should sit well back on
the booster seat/cushion.
3. For models with rear seat reclining
mechanism, if there is a gap between
the booster seat/cushion and the seat-
back, adjust the seatback angle until
good contact is achieved.
4. Run the lap and shoulder belt through
or around the booster seat/cushion
and the child following the instructions
provided by its manufacturer. For
booster seat/cushion with a belt guide,
use the seatbelt through the belt guide.
5. Insert the tongue plate into the buckle
until you hear a click. Take care not to
twist the seatbelt.
Make sure the shoulder belt is posi-
tioned across the center of child’s
shoulder and that the lap belt is
positioned as low as possible on the
child’s hips.
Child restraint systems
70
Loading ...
Loading ...
Loading ...