Loading ...
Loading ...
Loading ...
(340,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
speed is 12 mph (20 km/h) or more,
X-MODE will not be activated. At this
time, a buzzer will sound twice.
. If the vehicle speed reaches 25 mph
(40 km/h) or more while X-MODE is
activated, a buzzer will sound once
and X-MODE will be deactivated.
X-MODE will automatically reacti-
vate when the vehicle speed drops
below 22 mph (35 km/h).
– When you use the cruise control
after X-MODE is automatically
deactivated, X-MODE will not be
automatically reactivated when
the vehicle speed drops below
22 mph (35 km/h).
. If the engine could overheat because
of a temperature increase of the
engine coolant, it may not be possi-
ble to activate X-MODE. Even while
X-MODE is activated, X-MODE will
be deactivated when the engine
coolant temperature increases.
. The Auto Start Stop system will be
stopped while X-MODE is activated.
NOTE
. The SI-DRIVE mode will change to
the Intelligent (I) mode when
X-MODE is deactivated.
. The SI-DRIVE mode cannot be chan-
ged while X-MODE is activated. At
this time, a buzzer will sound twice.
. X-MODE will be deactivated if any of
the following conditions is met while
the engine is running.
– The CHECK ENGINE warning
light/malfunction indicator light
illuminates.
– The AT OIL TEMP warning light
flashes.
– The ABS warning light illumi-
nates.
– The Vehicle Dynamics Control
warning light illuminates.
When this occurs, it is not possible
to activate X-MODE. Also, for models
with SI-DRIVE, type A changes to the
Sport (S) mode, and type B remains
in the state that was in effect before
the warning light turned on. In this
case, it is not possible to change to
another mode.
For information on the types of
SI-DRIVE, refer to “SI-DRIVE
switches” �P326.
. If there is a possibility that the
engine could overheat because of a
temperature increase of the engine
coolant, it is not possible to change
to X-MODE. While the vehicle is in
X-MODE, it changes to the Sport (S)
mode or Sport Sharp (S#) mode
when the engine coolant tempera-
ture increases.
. It is not possible to activate X-MODE
when the engine is not running,
because the hill descent control
function is not activated.
. When X-MODE automatically reacti-
vates, the hill descent control func-
tion also reactivates.
& Hill descent control function
S07BI03
The hill descent control function will be in
standby mode when X-MODE is activated
and the vehicle speed is less than approxi-
mately 12 mph (20 km/h).
The function will operate when the vehicle
speed is less than approximately 12 mph
(20 km/h) and the accelerator ratio is less
than approximately 10%.
The function will turn off when the vehicle
speed is more than approximately 12 mph
(20 km/h) and the accelerator pedal is
depressed.
CAUTION
The braking power of the hill des-
cent control function may not be
sufficient when strong braking
power is needed (e.g., when towing
a trailer).
X-MODE
338
Loading ...
Loading ...
Loading ...