Loading ...
Loading ...
Loading ...
(311,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
engine” �P434.
. It may be difficult to start the engine
when the battery has been discon-
nected and reconnected (for main-
tenance or other purposes). This
difficulty is caused by the electro-
nically controlled throttle’s self-di-
agnosis function. To overcome it,
keep the ignition switch in the “ON”
position for approximately 10 sec-
onds before starting the engine.
. If the vehicle battery is discharged,
the steering cannot be unlocked.
Charge the battery.
. Do not shift the select lever while the
starter is cranking.
1 Operation indicator
2 Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the brake pedal,
the engine will start. The starting proce-
dure for the engine is as follows.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Apply the parking brake.
3. Shift the select lever into the “P”
position. The engine can also start
when the select lever is in the “N”
position, however, for safety reasons,
start in the “P” position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When
starting with the select lever in the “N”
position, the indicator does not turn
green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
. While pressing the select lever but-
ton in, the indicator on the push-
button ignition switch will not turn
green even when the select lever is
in the “P” position.
. In case the engine does not start by
the normal engine start procedure,
move the select lever to the “P”
position, and switch the power to
“ACC”. Depress the brake pedal,
and press the push-button ignition
switch for at least 15 seconds. The
engine may start. Only use this
engine start procedure in case of
emergency.
. When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-
button ignition switch turns green,
and press the push-button ignition
switch to start the engine.
& Stopping engine
S07BE04
1. Stop the vehicle completely.
2. Move the select lever to the “P”
position.
3. Press the push-button ignition switch.
The engine will stop, and the power will
be switched off.
WARNING
. Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the engine will stop.
– The switch is pressed and held
for 2 seconds or longer.
– CONTINUED –
Starting and stopping engine (models with push-button start system)
309
7
Starting and operating
Loading ...
Loading ...
Loading ...