Loading ...
Loading ...
Loading ...
(375,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
NOTE
. When the settings cannot be chan-
ged, the ON/OFF setting key will be
grayed out.
. The ON/OFF setting key may be
grayed out if the Reverse Automatic
Braking (RAB) system malfunctions,
etc. In this case, turn the ignition
switch to the “OFF” position and
then turn it to the “ON” position
again. If the setting cannot be chan-
ged even after turning the ignition
switch to the “ON” position again,
consult your SUBARU dealer.
. The settings will be restored as
follows when the select lever is
shifted to the “R” position next time.
– Reverse Automatic Braking
(RAB) system settings: default
(ON setting)
– Object detection warning beep-
ing sound: the setting selected
by operating the combination
meter display (color LCD)
Also, the following settings can be chan-
ged by operating the combination meter
display (color LCD).
. Warning volume
. Sonar audible alarm ON/OFF
For details, refer to “Menu screens”
�P196.
& RAB warning indicator
S07BN07
1 RAB malfunction message
2 RAB warning indicator
If the Reverse Automatic Braking (RAB)
system malfunctions, the above indicator
illuminates on the combination meter.
Contact the nearest SUBARU dealer for
details.
& Handling of the sonar sen-
sors
S07BN06
The 4 sonar sensors are located in the rear
bumper. To ensure the proper operation of
the Reverse Automatic Braking (RAB)
system, observe the following precau-
tions.
. Do not affix any stickers or other items
on the sonar sensor or the bumper
surface near the sonar sensors.
. Always keep the rear bumper surface
near the sonar sensors clean.
. Do not modify the rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply high pressure water to the
sonar sensors with a high pressure
carwashing machine.
– CONTINUED –
Reverse Automatic Braking (RAB) system
373
7
Starting and operating
Loading ...
Loading ...
Loading ...