Loading ...
Loading ...
Loading ...
(38,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
System settings. Refer to “Driver Mon-
itoring System settings” �P214.
! Registration of memory position
with button “1” or “2”
S01AQ060301
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “ON”
position.
. The select lever is in the “P” position.
2. Register the adjusted positions by
either of the following procedures.
. Press the “SET” button, then press
either “1” or “2” until a chirp sounds
within 5 seconds.
. While pressing and holding the
“SET” button, press either “1” or “2”
until a chirp sounds within 5 sec-
onds.
A chirp will sound once, and the seat
position and outside mirror angle on the
passenger’s side will be registered.
NOTE
If a new position is registered for the
same button, the previously registered
memory position is deleted.
! Registration of the reverse tilt-
down mirror angle with button
“1” or “2”
S01AQ060306
CAUTION
Depress the brake pedal when re-
gistering the reverse tilt-down mir-
ror angle.
1. Move the select lever to the “R”
position, then the outside mirror angle
will move to the reverse tilt-down
position.
2. Adjust the outside mirror angle. For
details about the settings, refer to
“Remote control mirror switch” �P249.
3. Move the select lever to the “P”
position, then the outside mirror angle
will return to its original position.
4. Register the adjusted positions by
either of the following procedures.
. Press the “SET” button, then press
either “1” or “2” until a chirp sounds
within 5 seconds.
. While pressing and holding the
“SET” button, press either “1” or “2”
until a chirp sounds within 5 sec-
onds.
A chirp will sound once, and the seat
position and outside mirror angle will be
registered.
NOTE
The factory setting (default setting) for
this function is set as the front passen-
ger’s side mirror. The setting of the
right and left side mirror/front passen-
ger’s side mirror operation can be
changed by a SUBARU dealer. Contact
your SUBARU dealer for details.
! Registration of memory position
with a key fob
S01AQ060302
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” position.
Seats
36
Loading ...
Loading ...
Loading ...