Loading ...
Loading ...
Loading ...
(169,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
Front passenger’s seat
! Operation
S03AE011401
When the ignition switch is turned to the
“ON” position, the driver’s and/or front
passenger’s warning light will illuminate,
then it will blink for several seconds. If the
seatbelt of the driver’s seat is not fastened,
the warning chime may make a peep
sound.
NOTE
. If the driver’s and/or front passen-
ger’s seatbelt(s) are/is not fastened
while driving, the seatbelt warning
system operates as follows accord-
ing to the vehicle speed.
– The warning light will illuminate
when driving approximately 4
mph (6 km/h) or less.
– The warning light will blink, and
the warning chime will make a
peep sound when driving be-
tween approximately 4 mph (6
km/h) and 13 mph (20 km/h). The
warning chime will stop when the
vehicle stops.
– The warning light will blink, and
the warning chime will sound
loudly when 15 seconds have
elapsed while driving between
approximately 4 mph (6 km/h)
and 13 mph (20 km/h).
– The warning light will blink, and
the warning chime will sound
loudly when driving approxi-
mately more than 13 mph (20
km/h).
. The warning light will turn off and the
warning chime will stop when the
seatbelt is fastened.
If there is no passenger on the front
passenger’s seat, the seatbelt warning
system for the front passenger’s seat will
be deactivated. The front passenger’s
seatbelt warning system monitors whether
or not there is a passenger on the front
passenger’s seat.
CAUTION
Observe the following precautions.
Failure to do so may prevent the
device from functioning correctly or
cause the device to fail.
. Do not install any accessory such
as a table or TV onto the seat-
back.
. Do not store a heavy load in the
seatback pocket.
. Do not allow the rear seat occu-
pant to place his/her hands or
legs on the front passenger’s
seatback, or allow him/her to pull
the seatback.
. Do not use front seats with their
backward-forward position and
seatback not being locked into
place securely. If any of them are
not locked securely, adjust them
again. For adjusting procedure,
refer to “Manual seat” �P33.
If the seatbelt warning system for the front
passenger’s seat does not function cor-
rectly (e.g., it is activated even when the
front passenger’s seat is empty or it is
deactivated even when the front passen-
ger has not fastened his/her seatbelt), take
the following actions.
– CONTINUED –
Warning and indicator
167
3
Instruments and controls
Loading ...
Loading ...
Loading ...