Loading ...
Loading ...
Loading ...
(361,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
! BSD/RCTA approach indicator
light dimming function
S07BM030101
When the headlights are turned on, the
brightness of the BSD/RCTA approach
indicator light will be reduced.
NOTE
. You may have difficulty recognizing
the BSD/RCTA approach indicator
light under the following conditions.
– When affected by direct sunlight
– When affected by the headlight
beams from the vehicles behind
. While the illumination brightness
control dial is in the fully upward
position, even if the headlights are
turned on, the brightness of the
BSD/RCTA approach indicator light
will not be reduced. For details about
the illumination brightness control
dial, refer to “Illumination bright-
ness control” �P165.
! BSD/RCTA approach warning buz-
zer (only when reversing)
S07BM0302
A warning buzzer sounds along with
flashing of the BSD/RCTA approach in-
dicator light to warn the driver of dangers.
The setting of the warning buzzer volume
can be changed by operating the combi-
nation meter display (color LCD). For
details, refer to “Menu screens” �P196.
! Safety tips regarding the BSD/RCTA
approach indicator light/warning
buzzer
S07BM0303
. In the following cases, operation of the
BSD/RCTA approach indicator light
and the warning buzzer may be de-
layed or the system may fail to issue
these warnings.
– When a vehicle moves to the neigh-
boring lane from a lane next to the
neighboring lane.
– When driving on a steep incline or
on repeated sharp uphill and down-
hill grades
– When going beyond a pass
– When both your vehicle and a
vehicle driving on a neighboring
lane are driving on the far side of
each lane.
– When several narrowly-spaced ve-
hicles are approaching in a row.
– In low radius bends (tight bends or
when making turns at an intersec-
tion)
– When there is a difference in height
between your lane and the neigh-
boring lane.
– Immediately after the BSD/RCTA is
activated by pressing the BSD/
RCTA OFF switch.
– Immediately after the select lever is
shifted to the “R” position.
– When extremely heavy cargo is
loaded in the cargo area.
. During reversing, operation of the BSD/
RCTA approach indicator light and the
warning buzzer may be delayed or the
system may fail to issue these warnings
under the following conditions.
– When backing out of an angled
parking space
– When a large-sized vehicle is
parked next to your vehicle. (That
vehicle prevents the propagation of
radar waves.)
– When reversing on sloped roads
– When reversing at a high speed
. The BSD/RCTA approach indicator
light may illuminate when driving close
– CONTINUED –
BSD/RCTA
359
7
Starting and operating
Loading ...
Loading ...
Loading ...