Loading ...
Loading ...
Loading ...
(233,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
& High beam assist function
S03AH07
NOTE
. The high beam assist function uti-
lizes the stereo camera installed at
the position of the upper side of the
windshield.
. For details on how to handle the
stereo camera, refer to the Owner’s
Manual supplement for the EyeSight
system.
The high beam assist function automati-
cally changes the headlight from high
beam to low beam (or vice versa).
When all of the following conditions are
met, the headlight will change to high
beam.
. When the vehicle speed increases to or
above 20 mph (32 km/h).
. There is no preceding or oncoming
vehicle.
. The forward area of the vehicle is dark.
. The road does not have a sharp curve.
When any of the following conditions are
met, the headlight will change to low beam.
. When the vehicle speed decreases to
or below 10 mph (16 km/h).
. When the forward area of the vehicle is
bright.
. When there is a preceding or oncoming
vehicle.
. When the EyeSight system is malfunc-
tioning or is temporarily stopped.
NOTE
. Do not overestimate the capacity of
the high beam assist function. The
driver always has the responsibility
to understand the surrounding si-
tuation, to drive safely, and to
change the headlight mode manu-
ally if necessary.
. The factory setting (default setting)
for this function is set as “opera-
tional”. This setting can be changed
to OFF (non-operation) at SUBARU
dealers. For more details, contact a
SUBARU dealer.
! How to use the high beam assist
function
S03AH0701
The high beam assist function will be
activated when all the following conditions
are met.
. The light control switch is in the “AUTO”
position and the low beam headlights
are on automatically.
. The turn signal lever is pushed forward.
High beam assist indicator light
When the high beam assist function is
activated, the high beam assist indicator
light on the combination meter will illumi-
nate.
NOTE
If the high beam assist function is
malfunctioning or is temporarily
stopped, the headlight will be fixed at
low beam.
! How to temporarily lower the sensi-
tivity of the high beam assist func-
tion
S03AH0704
The sensitivity of the high beam assist
function can be lowered by performing the
following operations.
– CONTINUED –
Light control switch
231
3
Instruments and controls
Loading ...
Loading ...
Loading ...