Loading ...
Loading ...
Loading ...
(166,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
In addition, it is possible to reset the trip
meter by pressing and holding the TRIP
RESET switch.
The indicators will turn off when:
– The TRIP RESET switch is not oper-
ated for approximately 10 seconds.
– The driver’s door is opened and then
closed.
& Fuel gauge
S03AD07
1 TRIP RESET switch
2 Fuel gauge
The fuel gauge is displayed when the
ignition is in the “ON” position, and it shows
the approximate amount of fuel remaining
in the tank.
The gauge indication may change slightly
during braking, turning or acceleration due
to fuel level movement in the tank.
NOTE
. You will see the “
” sign in the fuel
gauge. This indicates that the fuel
filler lid is located on the right side of
the vehicle.
. If you press the TRIP RESET switch
while the ignition switch is in the
“LOCK”/“OFF” or “ACC” position,
the fuel gauge will light up and
indicate the amount of fuel remain-
ing in the tank.
The indicators will turn off when:
– The TRIP RESET switch is not oper-
ated for approximately 10 seconds.
– The driver’s door is opened and then
closed.
& ECO gauge
S03AD12
The ECO gauge shows the difference
between the current rate of fuel consump-
tion and the average rate of fuel consump-
tion since the trip meter was last reset.
If the ECO gauge moves towards the +
side, this indicates better fuel efficiency.
NOTE
. The ECO gauge shows only an
approximate indication of fuel effi-
ciency.
. After resetting the trip meter, the
average rate of fuel consumption is
not shown until you have driven for 1
mile (or 1 km). Before that time, the
ECO gauge does not operate.
Meters and gauges
164
Loading ...
Loading ...
Loading ...