Loading ...
Loading ...
Loading ...
(486,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
& Front turn signal light
S11BE55
Right-hand side
1. Use a screwdriver to remove the clips
on the air intake duct, then remove the
duct.
Left-hand side
2. Use a screwdriver to remove the
secured clip of the washer tank. To
make it easy to access the bulb, turn
the neck of the washer fluid filler pipe
as illustrated.
3. Disconnect the electrical connector
from the bulb and remove the bulb
from the headlight assembly by turning
it counterclockwise.
4. Replace the bulb. At this time, use care
not to touch the bulb surface.
5. To install the bulb to the headlight
assembly, turn it clockwise until it
clicks.
6. Reconnect the electrical connector.
7. Put the air intake duct with the clips
(right-hand side).
8. Set the washer fluid filler pipe to the
original place and secure it with the
clips (left-hand side).
Replacing bulbs
484
Loading ...
Loading ...
Loading ...