Loading ...
Loading ...
Loading ...
(245,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
! Programming a New HomeLink
Button
S03AP070409
1 Indicator Light
2 HomeLink buttons
1. Press and release the HomeLink but-
ton that you would like to program. The
HomeLink indicator light will flash
orange slowly (if not, refer to “Erasing
HomeLink Buttons” �P245).
1 Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to
8 cm) away from the HomeLink button
that you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 inches
(15 to 30 cm). Keep this in mind if you
have difficulty with the programming
process.
3. While the HomeLink indicator light is
flashing orange, press and hold the
hand-held remote button. Continue
pressing the hand-held remote button
until the HomeLink indicator light
changes from orange to green. You
may now release the hand-held remote
button.
NOTE
Some devices may require you to re-
place this “Programming a New
HomeLink Button” step 3 with proce-
dures noted in the “Gate Operator/
Canadian Programming” section. Refer
to “Gate Operator/Canadian Program-
ming” �P245.
– CONTINUED –
Mirrors
243
3
Instruments and controls
Loading ...
Loading ...
Loading ...