Loading ...
Loading ...
Loading ...
(409,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
1. Insert the ball mount into the hitch
receiver tube.
2. Insert the hitch pin into the hole located
on the hitch receiver tube so that the
pin passes through the ball mount.
3. Insert the safety pin through the pro-
vided hole on the hitch pin securely.
4. Check the ball mount assembly by
pulling on it to make sure it does not
come off the hitch receiver.
1 Hitch ball installation point
2 Hooks for safety chains
5. Use only a hitch ball that is appropriate
for the ball mount and your trailer. The
hitch ball must be securely installed on
the ball mount.
6. Connect your trailer to the hitch ball.
7. Connect the trailer and the hitch with
safety chains that will hold the trailer’s
maximum gross weight. The chains
should cross under the trailer tongue to
prevent the tongue from dropping onto
the ground in case it should disconnect
from the hitch ball. Allow sufficient
slack in the chains taking tight turn
situations into account; however, be
careful not to let them drag on the
ground.
WARNING
Do not connect safety chains to any
part of the vehicle other than the
safety chain hooks.
Hitch harness connector
8. Connect the hitch electrical wire har-
ness’s black four-pin electrical wire
connector to the towing trailer’s wire
harness.
9. Confirm proper function of the hitch
electrical wire harness by individually
and combination activating the brake,
stop and turn signal lights on the trailer.
NOTE
Always disconnect the trailer electrical
wire harness before launching or re-
trieving a watercraft.
& If not towing a trailer
S08AK02
. Remove the ball mount from the hitch
receiver tube.
. Place the dust cap over the four-pin
connector of the hitch electrical wire
harness to protect against possible
damage.
. Occasionally lubricate terminals of the
four-pin connector using terminal
grease.
Trailer hitch (dealer option)
407
8
Driving tips
Loading ...
Loading ...
Loading ...