Loading ...
Loading ...
Loading ...
(401,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
CAUTION
Avoid prolonged continuous driving
in snowstorms. Snow will enter the
engine’s intake system and may
hinder the airflow, which could re-
sult in engine shutdown or even
breakdown.
! Wiper operation when snowing
S08AI0201
Before driving in cold weather, make sure
the wiper blade rubbers are not frozen to
the windshield or rear window.
If the wiper blade rubbers are frozen to the
windshield or rear window, perform the
following procedure.
. To thaw the windshield wiper blade
rubbers, use the defroster with the
airflow selection in “
” and the tem-
perature set for maximum warmth until
the wiper blade rubbers are completely
thawed. Refer to “Climate control”
�P255.
. If your vehicle is equipped with a wiper
deicer, use it. It is helpful to thaw the
windshield wiper blade rubbers. Refer
to “Defogger and deicer” �P251.
. To thaw the rear wiper blade rubbers,
use the rear window defogger. Refer to
“Defogger and deicer” �P251.
When driving in snow, if frozen snow starts
to stick on the surface of the windshield
despite wiper operation, use the defroster
with the airflow selection in “
” and the
temperature set for maximum warmth.
After the windshield gets warmed enough
to melt the frozen snow on it, wash it away
using the windshield washer. Refer to
“Windshield washer” �P239.
Snow stuck on the wiper arm prevents the
wiper from working effectively. If snow is
stuck on the wiper arm, pull off the road to
a safe place, then remove it. If you stop the
vehicle at road side, use the hazard
warning flasher to alert other drivers. Refer
to “Hazard warning flasher” �P162.
! Lighting operation when snowing
S08AI0202
Check that the headlights are clean before
driving. If snow, frost or ice are attached to
the headlights, remove it.
If the headlights are not clean, they will not
light the front normally. Also if the indica-
tors and brake lamps are not clean, the
vehicle will not be able to inform its status
to other drivers and it may result in an
accident.
& Corrosion protection
S08AI03
Refer to “Corrosion protection” �P442.
& Snow tires
S08AI04
WARNING
. When replacing or installing win-
ter tire(s), all four tires must be
the same for following items.
(a) Size
(b) Speed symbol
(c) Load index
(d) Circumference
(e) Construction
(f) Manufacturer
(g) Brand (tread pattern)
(h) Degrees of wear
For the items (a) to (c), you must
obey the specification that is
printed on the tire inflation pres-
sure label. The tire inflation pres-
sure label is located on the dri-
ver’s door pillar.
If all the four tires are not the
same for items (a) to (h), serious
mechanical damage could be
caused to the drivetrain of the
car, and affect the followings.
– Ride
– Handling
– Braking
– CONTINUED –
Winter driving
399
8
Driving tips
Loading ...
Loading ...
Loading ...