Loading ...
Loading ...
Loading ...
(53,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
seatback to the upright position. Move
the seat as far back as possible.
2. Sit well back in the seat.
3. Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted.
. If the belt stops before reaching the
buckle, return the belt slightly and
pull it out more slowly.
. If the belt still cannot be unlocked, let
the belt retract slightly after giving it a
strong pull, then pull it out slowly
again.
4. Insert the tongue plate into the buckle
until you hear a click.
5. To tighten the lap part, pull up on the
shoulder belt.
6. Place the lap belt as low as possible on
the hips, not on the waist.
! Adjusting the front seat shoulder
belt anchor height
S01AE060101
The shoulder belt anchor height should be
adjusted to the position best suited for the
driver/front passenger. Always adjust the
anchor height so that the shoulder belt
passes over the middle of the shoulder
without touching the neck.
To raise:
Slide the anchor up.
To lower:
Pull the release knob and slide the anchor
down.
Pull down the anchor to make sure that it is
locked in place.
– CONTINUED –
Seatbelts
51
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...