Loading ...
Loading ...
Loading ...
(150,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
! Memory function
S02AJ0101
Memory switch
Memory switch status
1 ON status
2 OFF status
Your desired rear gate height can be
registered.
Registration of the rear gate height:
To register the rear gate height, perform
the following procedures.
1. Open the rear gate using the power
rear gate function.
2. With the rear gate at the desired
height, stop it using the power rear
gate function.
3. Press the memory switch to select the
“ON” status.
Power rear gate button on the inside edge
of the rear gate
1 Power rear gate button
2 Power rear gate lock button
4. With the rear gate at the desired
height, press and hold the power rear
gate button on the inside edge of the
rear gate until an electronic chirp is
heard and the hazard warning flashers
flash three times. The electronic chirp
and the flashing hazard warning
flashers confirm the selected rear gate
height has been registered.
NOTE
. To change the registered height,
press the memory switch to select
the “OFF” status and perform the
registering procedure again.
. It is possible to register the height
from approximately 2 in (5 cm) or
more from the completely closed
position.
Retrieval of the rear gate height:
To open the rear gate and stop it at the
registered height, perform the following
procedure.
1. Press the memory switch to select the
ON status.
2. Press and hold any of the power rear
gate switches.
Even if any of the power rear gate switches
are pressed and held while the memory
switch is in the OFF status, you can stop it
at the registered height by pressing the
memory switch to select the ON status
Rear gate
148
Loading ...
Loading ...
Loading ...