Loading ...
Loading ...
Loading ...
(68,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
system does not fit snugly against
the contours of the rear center seat
cushion, install the child restraint
system in the window-side seating
position to be safe. For details, refer
to “Where to place a child restraint
system” �P63.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by
its manufacturer.
3. Insert the tongue plate into the buckle
until you hear a click.
4. Take up the slack in the lap belt.
5. If using the seatbelt in the ALR mode is
recommended by the manufacturer’s
instructions supplied with the child
restraint system, perform the following
procedure.
(1) Pull out the seatbelt fully from the
retractor to change the retractor
over from the Emergency Locking
Retractor (ELR) to the Automatic
Locking Retractor (ALR) mode.
(2) Allow the belt to rewind into the
retractor. As the belt is rewinding,
clicks will be heard which indicate
the retractor functions as ALR.
6. Before having a child sit in the child
restraint system, try to move it back
and forth and right and left to check if it
is firmly secured. Sometimes a child
restraint system can be more firmly
secured by pushing it down into the
seat cushion and then tightening the
seatbelt. It should not be possible to
move the child restraint system more
than 1 in (2.5 cm) in any direction along
the seatbelt path.
7. If the seatbelt has been set to the ALR
mode in step 5, pull at the shoulder
portion of the belt to confirm that it
cannot be pulled out (ALR properly
functioning).
Child restraint systems
66
Loading ...
Loading ...
Loading ...