Loading ...
Loading ...
Loading ...
(385,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
1. When the door is opened and the
push-button ignition switch is OFF,
the user recognition screen appears
and the Driver Monitoring system
starts user recognition.
The user recognition screen may not
appear when the door is opened in
some cases, such as when only a short
time has passed after the push-button
ignition switch was turned OFF. In such
cases, user recognition starts when the
door is closed however the user
recognition screen does not appear.
2. Sit in the driver’s seat and face forward
for a few moments.
3. When user recognition is completed,
the Hello screen appears on the multi-
function display.
At this time, the seat position, outside
mirror angle, climate control settings,
combination meter display basic screen,
multi-function display basic screen, and
customization settings all change based
on the user information.
NOTE
. When a multi-function display op-
eration switch is pressed, the user
recognition screen is canceled,
however user recognition con-
tinues.
. When the select lever is not in the
“P” position, the seat position will
not change even when user recogni-
tion is completed.
. If user recognition fails, perform
recognition again following the in-
structions, refer to “When a user is
not recognized” �P384.
. User recognition is not performed
while driving.
. If the seat position or outside mirror
angle are in motion at the time when
user recognition is completed, then
it is not possible to retrieve the seat
position, outside mirror angle, or
reverse tilt-down outside mirror an-
gle.
. If any of the following operations is
performed while retrieving of the
seat position or outside mirror an-
gle, retrieving of the seat position
and outside mirror angle is can-
celed.
– The power seat adjustment
switch was operated.
– The outside mirror adjustment
switch was operated.
– The “SET” button was pressed.
– The “1” or “2” button was
pressed.
– The select lever was moved to a
position other than “P” position.
– CONTINUED –
Driver Monitoring System
383
7
Starting and operating
Loading ...
Loading ...
Loading ...